Mechanical Part

2024-01-27 12:31:20

2011 Buick Lucerne Struts and Air Shocks

Brand new front struts and rear air shocks for a 2011 Buick Lucerne CXL KYB Strut Plus part number - SR4211 front - cost $180 each new SR4116 rear -

Bismarck, ND

$400 OBO

2024-01-25 08:57:15

Chevy Transfer case. Late 90s-early 2000s. From a 02 Chevy suburban but will

fit others. Also have a core transmission 4L60E

Cartwright, ND

$400

2024-01-25 08:56:25

Fuel pump and regulator. Brand new fuelab pump and regulator. Never

used for a project. Now just collecting dust. Will work for many different applications. $650.

Cartwright, ND

$650

2024-01-14 00:27:33

A/C COMPRESSOR CLUTCH

KIT PULLEY COIL Fits 1994-2002 Dodge Ram 1500 8 Cyl 5.9L Once received, no longer needed, couldn't return

Linton, ND

$40

2024-01-13 11:33:07

Never Used! - UAC - Blower Motor - BM4038

I bought and didn't end up needing to use. More info about the item below. The UAC HVAC Blower Motor part number BM 4038C is a reliable and efficient

Bismarck, ND

$20

2024-01-11 08:41:39

2008-2012 Ford Superduty airbox

Napoleon, ND

$75 OBO

2024-01-10 14:12:31

Gauges. Banks boost and Pyro. One brand new boost gauge. And then a set

of used ones with pod for dash. 100 for new gauge. 150 for the used set.

Cartwright, ND

$100

2024-01-08 12:19:30

***1998 DODGE DAKOTA**

Complete ball joints and tie rods for a 1998 dodge Dakota 2wd asking 50$

Bismarck, ND

$40

2024-01-08 08:28:59

Super Duty 6.2 Stock Exhaust

Super Duty stock exhaust off a 2017 6.2 but will fit other years too. It's off a crew cab long box so it could be shortened to fit any cab/box arrangement. Exhaust only

Mandan, ND

Parting out 1988 GMC K3500 extended cab 8' bed 5.7L manual transmission.

2024-01-03 18:35:10

5 Photos

Parting out 1988 GMC K3500 extended cab 8' bed. Engine blew up & we turned the bed into a trailer. Selling the manual transmission ( needs new syncros, shifts hard), transfer case, clutch, 350 flywheel,

Burlington, ND

Contact for Price

2024-01-03 08:18:10

2002 Volkswagen 1.8 turbo engine. Engine has been professionally remaned. It has p

erformance pistons and rods. It is a balanced rotating assembly, has a performance intake, and comes completely assembled,

New England, ND

$5,000 OBO

2024-01-03 00:42:54

8 Photos

2007 DODGE CHARGER FOR PARTING OUT

This Charger is RWD 4 door sedan, has 232752 Miles on it, 3.5 L engine runs good, sounds good, build sheet code, EGG : 3.5L High Output V6 24V MPI Engine, VIN

Inkster, ND

Multiple Prices

2024-01-02 00:44:59

Volkswagen type 3 dual port Holley bug spray 2 bbl carb manifold , $150

Killdeer, ND

$100

2023-12-31 09:56:09

4 Photos

40 different antique light/switches/mirrors for trucks 1950 on up.

Frazee, MN

$325 OBO

2023-12-29 14:53:11

11 Photos

Parting out Yukon denali xl has new crate LS6.2 liter motor with less than 500 mil

es. Complete engine with all brackets and accessories, new rebuilt transmission and transfer case. Will sell parts

Minot, ND

$8,500

2023-12-27 12:38:37

5.9L 24 Valve Cummins Head ('98 - '02)

Came off a 1999 5.9L Cummins Block No wear or tear on Head. No visible cracks or bad valves. 217k miles on Head It will need to be Decked by a Machinist.

Richardton, ND

$450 OBO

2023-12-23 18:58:01

Core support from a 2006 chevy silverado 1500. Complete with cooling fans, ac cond

enser, rad and trans cooler. Asking 450 cash

Bismarck, ND

$450

2023-12-17 20:58:50

ISO 95-97 Chevy 6.5 turbo diesel engine

Looking to buy a 95 range 6.5 turbo diesel engine. Does not have to be running or low mileage as I am looking for an engine to strip apart and start an engine

Bismarck, ND

2023-12-16 20:52:52

Used fluidyne honda half radiator with electric fans.

Lincoln, ND

$120

2023-12-16 07:14:36

MASTER CYLINDER FOR A LATE 70'S DATSUN PICKUP.

New England, ND

Custom made headers for a 60 series Ford flat head V8.

2023-12-16 07:14:35

The pipes can be shortened, they were for another project that they did not get used on.

New England, ND

$200

2023-12-16 07:14:27

Honda remaned engine...ready to install!!!

Early 80's Honda engine.It is a completely remaned.Engine has all new internal parts.It also has a new cylinder head.Its complete with everything on it.Also have the clutch,alternator,starter, and

New England, ND

$750

2023-12-16 07:14:24

New in the box connecting rods. These are Maxspeeding performance rods. They come

with Arp bolts and pin bushings. They are roughly a 18mm pin and 40mm bottom. Bought for a project that did not get

New England, ND

$250

2023-12-12 15:57:05

Multiple Like New Allison Transmissions

Like new internals. Pics of each. Cash or trades. Willing to work deals. 5 and 6 speeds available. Pm me with any questions. Thnx

Harrisburg, SD

2023-12-11 14:01:10

GM 2.5 new Badger piston 4 cyl

I have a new set of piston for a gm 2.5 engine for sale these are badger pistons and are marked .30

Bismarck, ND

$80 OBO

2023-12-07 11:06:55

4 Photos

Fantech FKD 16"with ec motor inline fan. This fan has very low hrs on it

(probably less than 150) and is designed for commercial 24/7 operation with lifespan up to 10 years continuous use. The speed

Bismarck, ND

$1,500 OBO

2023-11-06 09:10:05

4 Photos

3.9L,General Motors SFI, V6, Used Engine Assembly

We have For Sale a 3.9 L V6 engine out of a 2008 Chevrolet Uplander, with a Engine VIN code of 1 and build sheet code of LZ9. Will work in other

Inkster, ND

$1,000

2023-10-20 06:50:35