Any Miles From Columbus, OH

Customize your Search Radius & Location

Automobiles578

More Links

Hire It HauledFree / Giveaway ItemsPet GiveawaysWant AdsTradingStores & Dealers

My Links

Saved Searches0 Watch List0 Recently Viewed0

Mechanical Part

568 Results
On The Spot Truck Repair
2025-03-05 01:44:59
Prominent Listing
12 Photos
REMAN CUMMINS ISM M11- 450 HP -CM570 ENGINE
REMAN CUMMINS ISM M11 CM570 ENGINE, PROFESSIONALLY REBUILT, DONE RIGHT.
Columbus, ND
$22,550
Jr. Dragster Dad
2025-04-03 06:39:57
3 Photos
JE Pistons part number 258222 for a BBC with 4.625 Bore. 1.120 Compression Height.
Was originally purchased for a 4.625 Bore, 4.750 Stroke, & 6.700 Rod but as you can see from the box will fit other
Nortonville, ND
$1,000
Roger
2025-04-02 23:23:36
5 Photos
171cc Gy6 big bore with 50 miles left on break in oil has wiring harness and carb
also have frame no title with lowered seat and under the seat tail light. Never used lowered rear shock, coil , fuel
Dickinson, ND
$1,500  OBO
Escheaffer
2025-04-02 20:16:06
ISO 241-DLD transfer case.
Looking for a 241-DLD 272 t-case for a 98 dodge 2500 manual shift. Need to be in working order.
Jamestown, ND
Free / Giveaway
Hunt
2025-04-02 19:11:30
LB7 TCM
Perfectly good factory TCM, was tracing a problem and found out it was a harness issue and not a tcm issue. Put back in pickup verified it works and shifts as it should. Already programmed
Bottineau, ND
$400
Mike
2025-04-02 15:58:09
5 Photos
Vortec Engine was going to use for a project truck got rid of the truck and have n
o use for it now got it in California came out of a truck
Williston, ND
Make an Offer
one-mario
2025-04-02 09:35:06
5 Photos
INTAKE MANIFOLD PLASTIC 2012 FORD EXPEDITION 5.4
New $500 - needs to be cleaned up with new seals installed - was replaced with a new one that did not to be replaced because leak was a hose leak
Grand Forks, ND
$150
allen
2025-04-02 09:15:06
i have lots of car and pickup parts
Sykeston, ND
$1
Dustin R.
2025-04-02 08:25:14
3800 Triple Airbag Air Spring 14" Extended 8.5" Diameter, 5" closed 1/2" port 3"
3800 Triple Airbag Air Spring 14" Extended 8.5" Diameter, 5" closed 1/2" port 3½" bolt pattern used for 1 month had to go with doubles for my application. 4 available
Bismarck, ND
$100  Each
302bronco
2025-04-02 06:42:39
2 Photos
2013 Ford 6.7 diesel exhaust fluid tank
Item is sold as pictured. The tank does not leak. It is actually still full of fluid. It was removed from a deleted 2013 f250. I do not know which parts
Mohall, ND
$200
Harlan
2025-04-02 06:21:28
2 Photos
(Used) Edelbrock Chrome Valve Covers.
These are for a small block Chevrolet. Come as shown. With chrome hold down t-handles with studs, spreader bars, and dip stick tube.
Bismarck, ND
$75
Harlan
2025-04-02 06:21:16
3 Photos
(Used) Throttle Body OEM Carburetor.
This Carburetor came off of a 1985 305 cu. in. small block Chevrolet. It was taken off and put in a box and has been on the shelf for 30 years.
Bismarck, ND
$50
Harlan
2025-04-02 06:21:06
3 Photos
(Used) Cast Iron Intake Manifold for a Big Block Chevrolet.
(Used) This manifold came off of a 1972 402 cu. in. big block Chevrolet. It has been cleaned up sand blasted and repainted and is ready for installation. It has rectangle ports.
Bismarck, ND
$100
Harlan
2025-04-02 06:20:56
3 Photos
(Used) Stock Heads for a 350 cu. in. Chevrolet.
(Used) Stock heads that came off of a 350 cu. in 1976 Chevrolet engine. They come complete as shown. Casting number is 333882 on both heads.
Bismarck, ND
$100
Soccermom
2025-04-01 19:08:48
1999 blazer rear end. 3:45 gears, dissembled, painted, ready to be put back
together. $400
Mandan, ND
$400
Randy
2025-04-01 16:35:48
6 Photos
Ford 300 4.9L In-Line Six Motor Heavy Duty (HD)
Good condition, stored inside. Sold as is (used). May need complete tune-up. These motors are dependable, and can be used in industrial applications
Bismarck, ND
$900  OBO
blancaify59
2025-04-01 15:32:32
4 Photos
Kelderman rear 4 link suspension for dodge ram 3500 8 inch lift used . Everything
works just take off cause I pull a trailer and is to much for my work
Bismarck, ND
$2,000  OBO
DeerHunter
2025-04-01 13:36:33
3 Photos
Cold Air Intake- 8th Gen Honda Civic. May fit others?
Cold Air Intake- 8th Gen Honda Civic. *Folks- please do a bit of research and look at the pictures before you commit to purchase- yes, it's a cold air intake and not just a simple installation.* Price
Hazen, ND
$125
Alex
2025-04-01 13:18:23
2 Photos
Motor and parts from 1978 C10 Chevy truck. Make me an offer. Not sure on
condition of motor. Was in it when I got the truck. Currently not running.
Bismarck, ND
$1  OBO
Chad
2025-04-01 07:12:01
3 Photos
5.0 ford coyote engine came out of a 2 wheel drive 2016 f150 selling engine,
transmission wiring and computer all together has 60,000 miles on it asking 7000 call anytime 527-9227
Bismarck, ND
$7,000
Bill
2025-04-01 06:53:33
3 Photos
Chevy Quadrajet oval port intake manifold
used on 396 and 427 Big Blocks Casting# 3883948, date code A67 makes this a 1967 intake. Used on Camaro, Chevelle, Impala. This intake has been
Mandan, ND
$275
Bosch
2025-04-01 06:48:41
2009 Laramie dodge 1500
parts pickup Motor, Trans, and transfer case all worked strong before it was partially rolled. Not sure on miles has sat a couple years now would have to put a battery back
Marion, ND
$2,000
Matt
2025-04-01 04:56:54
ARP main studs for chevy small block
Two bolt main, small journal, brand new https://www.summitracing.com/parts/arp-134-5402
Mandan, ND
$50
Dylan
2025-03-31 23:04:21
Small Block Chevy
Serious Inquiries Only Please. Considering selling this strong piece. This is a 360 cubic inch small block chevy, bored .060 over, 6 inch rods. 13 to 1 compression. High octane
Valley City, ND
$8,500  OBO
Travis Fossen
2025-03-31 22:04:09
2 Photos
SDK311
Differential Rebuild Kit Includes the bearings The nut the seal and the sleeve But it is missing the 2 gaskets The brush and the marking compound
Minot, ND
$50  OBO
4-link
2025-03-31 21:34:24
6 Photos
FS: Chevy 4.8 engine
Selling a good used 4.8 gen 4 (big rods/floating wristpins) but still 24x crank sensor. I had plans for boost but changed the engine. Gap rings and add heads and a cam and
Minot, ND
$200  OBO
Jonathan
2025-03-31 18:04:42
4 Photos
Boat parts Johnson/Evinrude Carb set
Off of a 1977 Johnson 75 go but for other models as well Complete with linkages and hardware
Bismarck, ND
$60  OBO
Mr Bear
2025-03-31 16:54:13
3 Photos
Edelbrock 1405 Carb 600 CFM
Linkage all looks good, know nothing else about it.
Baldwin, ND
$100
Mr Bear
2025-03-31 16:51:59
3 Photos
SBC Edelbrock Torker Intake
Casting number 2725, one Heli Coil in front accessory hole, the rest of the threads look good.
Baldwin, ND
$125  OBO
Tanya / Jon
2025-03-31 16:28:11
Hub Wheel bearing set
New 1 wheel bearings, races, seals, and dust caps. 4 centers hub EZGO front TXT/Medalist G&E 2001 and up.
Bismarck, ND
$40  OBO
568 Ads | Page 1 of 19 | Jump to Page: