Parts/Tires

John Deere starefire 3000 Position Reciever Wire for $40 part number pfp10470

Harvesting Equipment - Ashley, ND

$40

2024-09-28 15:52:08

Sunmaster Head Complete PTO Assembly

This is a new PTO Assembly for a 830 Sunmaster Header. It retails at over $800 will sell for $500. For the JD 21 spline 1000 PTO just change out the yoke or use

Harvesting Equipment - McClusky, ND

$500

2024-09-28 15:47:59

Honey Bee Monitor All Grain Belt Plus Flex Heads

Slightly used on a demo combine, Complete Monitor, Controller, Harness, Suction Cup Mount. Retails at $5,500 Sell For $2775 Delivery Possible

Harvesting Equipment - Harvey, ND

$2,750 OBO

2024-09-28 15:47:37

SAVE$ Header Drapers, Bailer, Windrower & Conveyor Belts

Premiere OEM. belting and canvas from the world leading manufacturer made right here in North Dakota . Simply put you can't buy a better, tougher, longer lasting product Period. All belts and canvas's

Harvesting Equipment - Harvey, ND

Contact for Price

2024-09-26 21:28:06

9 Photos

2019 zuidberg tracks. Have a 10 hole pattern to fit combines tractors. Worked

amazing for me for the 1 season I needed them for on corn and beans. Still in near new condition. Have a combine with

Harvesting Equipment - Jamestown, ND

$38,000 OBO

2024-09-26 09:45:17

Top chaffer out of a 2388 CIH combine. Bought a new one found out after I had take

n it out I could fix mine which I did. The adjuster bolts were worn out. I had already drilled out the holes for the

Harvesting Equipment - Drake, ND

750/65R26 Firestone John Deere rear wheels

2024-09-24 08:15:20

5 Photos

Ran them on a 2 wheel drive s670 combine. Work great when it’s wet and fields are soft. As far as I know would fit anything from a 50 series to an

Harvesting Equipment - Linton, ND

$6,000

2024-09-23 00:57:07

Gator header lift guards to go on a combine header. Got quite a few

Harvesting Equipment - Maxbass, ND

$25 Each

2024-09-20 11:20:30

4 Photos

CaseiH small tube rotor

Nice shape, good rub bars. Nothing wrong with it. Swapped out for a large tube

Harvesting Equipment - Martin, ND

$2,000 OBO

2024-09-20 10:41:04

9 Photos

Combine Tracks off 9650 deere but will fit to any make. Used one fall to finish

and been in shed. Make offer

Harvesting Equipment - Fosston, MN

$40,000

2024-09-19 11:12:13

ST-1000 Used on 2500 acres of corn in the fall/winter of 2019-2020 Very good condition and very little road time Used on a 2016 S680 but conversion kits are available

Soucy Combine tracks

Harvesting Equipment - Bowdon, ND

$50,000 OBO

2024-09-16 16:10:47

4 Photos

John Deere Combine Rims 38s

John Deere Combine Rims 38’s 2 John Deere outter rims. 20 bolt pattern. Had 650/85R38 tires on them. John Deere part no. AXE75318, they sell new for $3650 ea. at RDO, make reasonable offer. Will

Harvesting Equipment - Bismarck, ND

2024-09-16 11:22:57

Fits New Holland for sure maybe case, the side shield hugs the fan more on the case Custom built Better airflow and lower chance of fire

Sunflower Chimney

Harvesting Equipment - Mandan, ND

$500 OBO

2024-09-15 12:12:04

Macdon fd75 40 foot left sickle and other spare parts

Have spare left sickle for 40 foot macdon as well as brand new pea auger drive motor Sickle has brand new sections on it don’t have the

Harvesting Equipment - Rolla, ND

$200

2024-09-15 07:16:49

Header hitch, came off a 9770 jd combine

Harvesting Equipment - Souris, ND

$300

2024-09-13 00:36:21

7 Photos

Parting out 1688 CIH combine, good Cummins engine, AFX rotor

8.3 Cummins, 250 hp, starts and runs well, no smoke or blowby, hear it run, $3000. Complete AFX rotor, very good rasp bars, nice, $2000 Good

Harvesting Equipment - Selby, SD

$3,000

2024-09-10 09:40:39

New John Deere top seive deep tooth dual zone fits a 7720

Harvesting Equipment - Strasburg, ND

$300

2024-09-08 18:20:28

2004 John dere parts I have lots of parts off a 2004 9760 John deere combine

2004 John dèere parts¹ I have lots of parts off a 2004 9760 John deere combine Paul's and .other.parts back end was burned call me see if I got it

Harvesting Equipment - Sykeston, ND

$1 OBO

2024-09-08 16:06:30

4 Photos

20 series CaseIh combine feederhouse.

Complete unit less faceplate. No rock trap. Parts are all in good condition.

Harvesting Equipment - Martin, ND

$3,500 OBO

2024-09-07 09:32:40

Round bar and small wire concave set for John Deere

Harvesting Equipment - Watford City, ND

2024-09-05 19:46:36

john deere perforated clean grain auger and elevator cover fits any rotary combine

This is the clean grain cover that goes underneath the combine and it lets fines fall out to clean up your sample

Harvesting Equipment - Minot, ND

Multiple Prices

2024-09-05 19:39:54

john deere concave adapter bands for roundbar small rotor 9560 9570 s550

these are bands to convert roundbar concaves to do wheat or can be out in for tough beans. I have 4 available which would

Harvesting Equipment - Minot, ND

$200

2024-09-05 08:45:18

For Sale: axle extensions, 43 inches long, 10 bolt, from Gleaner combine but will fit others

Axle extensions

Harvesting Equipment - New Rockford, ND

Contact for Price

2024-09-04 19:49:47

Off a 60 series All parts not cracked good condition Put heavier one on Would go on a 50 series if you want to put a hydraflex on it 7zero1-8four0-0nine4four

John Deere face plate

Harvesting Equipment - Rogers, ND

$1,900

2024-09-04 03:34:48

ST 1000 Soucy tracks. Used in 2019 had them on a CIH 8010 but will fit most other

combines

Harvesting Equipment - Harvey, ND

$24,000

2024-09-01 01:08:10

Soucy ST1000X Combine Tracks

Soucy ST1000X Combine Tracks. Great shape not many acres on them. No adapter needed for John Deere and Can come with Case flagship final drives and extensions.

Harvesting Equipment - Carrington, ND

$55,000

2024-08-30 09:59:56

Roller Knives Off Case 4400 Corn Head

Ran head for 2000 acres. Knives in almost brand new condition. 96 total knives. Brand knew are $51 a piece. Selling as a total set for $3,500 ($36.50/knife)

Harvesting Equipment - Wimbledon, ND

$3,500

2024-08-28 00:06:46

Complete unloading auger for CIH 1680 combine, good shape

16' 3" overall length of tube, nice and straight, no leaks and no damage, good flighting, $600. Includes support rod. I paid $1000 for this

Harvesting Equipment - Selby, SD

$600

2024-08-23 08:29:01

John Deere round bar concave

Part #AH206456 Used very little, maybe 1000 acres Came out of an S670 We installed new style concaves this year New John Deere price today is $1065 Will deliver

Harvesting Equipment - Langdon, ND

$650

2024-08-15 07:37:25

John Deere Round Bar Concaves

Two sets of round bar concavesIn decent shape Just switched to aftermarket concavesAlso have a set of small wire concaves

Harvesting Equipment - Rolette, ND