Mixers

2024-08-09 11:07:47

NDE twin screw mixer wagon

Livestock Equip. - Rugby, ND

$25,000 OBO

2024-08-08 09:26:04

2 Photos

Vermeer VT600 Mixer

Vermeer vertical mixers are built to enhance feeding routines for producers looking to optimize ration costs and help reduce feed waste. These mixers create a consistent and

Livestock Equip. - Kenmare, ND

2024-08-08 09:05:03

830 cu. ft. Heavy duty 88” screws with self sharpening knives driven by heavy duty USA gearboxes Large unloading door for efficient unloading RH discharge with magnet on end

Haybuster 830 Mixer

Livestock Equip. - Kenmare, ND

$77,000

2024-08-08 09:04:38

Brand New Patz 615 Mixer 1200 Series II Rubber extension on top make it approximately 690 cu. ft. RH Discharge Conveyor Consistant TMR from start to finish no matter the load size. Accurate

Patz 615 Mixer

Livestock Equip. - Kenmare, ND

$62,000

2024-08-08 08:57:09

2 Photos

Vermeer VT970 Mixer

Vermeer vertical mixers are built to enhance feeding routines for producers looking to optimize ration costs and help reduce feed waste. These mixers create a consistent and

Livestock Equip. - Kenmare, ND

2024-08-08 08:51:31

Built on the same base platform as the VT600, the Vermeer VT750 twin-screw vertical mixer works well for a variety of operations. With a standard full set of knives on the overlapping

Vermeer VT750 Mixer

Livestock Equip. - Kenmare, ND

2024-08-08 08:45:08

Vermeer bale processors quickly grind up hay bales and lay down windrows to provide equal feeding room for cattle. As the bales are processed, dust and mold are blown away

Vermeer Bale Processors

Livestock Equip. - Kenmare, ND

2024-08-06 21:46:19

Feeding tires with one side cut out. Over 70 to pick and choose from. Many different sizes. Asking $30/tire.

Feeding tires for sale

Livestock Equip. - Cogswell, ND

$30

2024-08-06 12:38:37

715 cubic ft mixer is one of the largest single auger mixers available. 13 knives, walking tandem axles, cv pto, 54” right hand incline conveyor, weightronix scalehead.

New Cloverdale 720

Livestock Equip. - Dunn Center, ND

$56,000 OBO

2024-08-05 16:39:40

7 Photos

New NDE FS700 tmr vertical mixer

Single auger with tungsten knives, 3 ft front incline conveyor, walking tandem axles, rubber top extension, constant velocity pto shaft, point scale.

Livestock Equip. - Dunn Center, ND

$56,000

2024-08-05 16:39:11

Mixer Repair and mixer parts

Cloverdale knives bolt into most vertical mixers on the market. Knives, scaleheads, weighbars, conveyors, augers, liners, bearings, conveyor chain for every brand of

Livestock Equip. - Dunn Center, ND

2024-08-05 16:38:58

NDE U850d Vertical mixer/tmr

-NDE U850d Vertical mixer/tmr scheduled to arrive April 20, New mixer within dual augers , 850 cubic ft capacity, walking tandem axles, xl scale indicator, cv pto, carbide knives, 3 ft front incline

Livestock Equip. - Dunn Center, ND

2024-08-05 16:38:36

Cloverdale 900T vertical mixer

900T mixer. 1050 cubic ft capacity. Has a front right hand 54 incline conveyor, hydraulic shift two speed gearbox, extra large scalehead, rubber top extension, 5 year

Livestock Equip. - Dunn Center, ND

$85,500

2024-08-05 16:38:21

NDE FS850D tmr vertical mixer

NDE Fs850 tmr vertical mixer New 850 cubic ft dual auger mixer with 3 ft conveyor with right hand delivery. Semi trailer suspension. Rubber top extension, constant velocity pto shaft. Last pictures

Livestock Equip. - Dunn Center, ND

New NDE FS950 Tmr vertical mixer

2024-08-05 16:38:10

7 Photos

In stock now. 950 cubic ft , rubber top extension, carbide tipped knives, trailer suspension, super single truck tires

Livestock Equip. - Dunn Center, ND

2024-08-05 16:37:56

- New NDE U700d, 700 cubic ft twin auger mixer with walking tandem axles, rubber top, right hand Incline conveyor

NDE U700d

Livestock Equip. - Dunn Center, ND

2024-08-05 16:37:30

New model for Cloverdale. 986 cubic ft mixer, 12” taller tub than the standard 650t mixer but with a heavier frame and axles. 54” right hand incline, hydraulic shift two speed,

New Cloverdale 830T

Livestock Equip. - Dunn Center, ND

2024-08-05 16:37:18

Coming in soon. 615 patz with rubber top extension, tub magnet and external display. Conveyor slides out. Truck has Cummins with manual and low range. Live hydraulics mounted

615 patz truck mixer tmr

Livestock Equip. - Dunn Center, ND

2024-08-05 16:37:10

Fresh trade, nice condition, 620 cubic ft with rubber top, tub magnet, right hand incline conveyor.

Used patz 500 tmr mixer

Livestock Equip. - Dunn Center, ND

$31,000 OBO

2024-08-05 16:36:58

Mixer project. Needs front planetary and liner welded in. Running gear is good, tw

o speed gear box. 950 cubic ft capacity. We can supply new planetary and liner to fit.

Livestock Equip. - Dunn Center, ND

$9,500

2024-08-05 16:36:51

Used Cloverdale 550t tmr mixer

Used Cloverdale 550 tmr mixer 2023 model, 675 cubic ft capacity, 4 ft Left hand side conveyor with magnet, hydraulic shift two speed, 20 knives, lugged tires. Fresh oil change. Like new condition

Livestock Equip. - Dunn Center, ND

$63,500 OBO

2024-08-04 23:02:42

6 Photos

Vermeer bp8000 bale processor

Has almost new knives and is ready for use. Had a break on the hitch but was fixed properly and is stronger than factory. 1000 pto. Has 2 hydraulics so can run on

Livestock Equip. - Faith, SD

$7,500

2024-08-03 18:41:08

7 Photos

2022 Vermeer BPX 9010 bale processor

Approximately 800 bales through the machine One owner bought it brand new Always stored inside Open to offers

Livestock Equip. - Bantry, ND

$25,000 OBO

2024-08-02 21:55:01

Patz Vertical Mixer Wagon

Reduced- Patz Vertical Mixer Wagon Patz v500 vertical mixer wagon with scale. Been a good mixer for us. We just updated to a larger wagon.

Livestock Equip. - Noonan, ND

$12,000

2024-07-30 21:16:24

6 Photos

Used Cloverdale 650t tmr mixer

Just traded, fully serviced with recent knives, 830 cf capacity, two speed gear box, tub magnet, walking tandem axles, weightronix scalehead.

Livestock Equip. - Dunn Center, ND

$48,600 OBO

2024-07-30 21:16:15

Cloverdale Smartfeeder Video link at farwestequipment.net http://www.farwestequipment.net/equipment-videos.html Hydraulic powered feeder wagon feeds everything you have including whole round bales,

Cloverdale Smart Feeder

Livestock Equip. - Dunn Center, ND

Scale Tec point scale-grain carts, seed tenders, mixers, livestock scales

2024-07-30 21:16:04

Far West Equipment is a stocking dealer for Scale Tec point scales and LED remote displays. We also carry weightronix scalehead s and weighbars.

Livestock Equip. - Dunn Center, ND

2024-07-30 21:15:58

New 700 cf mixer with walking tandem axles, 3 ft incline conveyor, rubber top extension, tungsten coated knives.

New NDE U700d

Livestock Equip. - Dunn Center, ND