Any Miles From Columbus, OH

Customize your Search Radius & Location

Merchandise8235

More Links

Hire It HauledFree / Giveaway ItemsPet GiveawaysWant AdsTradingStores & Dealers

My Links

Saved Searches0 Watch List0 Recently Viewed0

Other

461 Results
japraus
2024-01-27 09:36:20
2 Photos
Kreig Jig
Model M2 This is listed for a friend any information needed call (701) 471-5309 leave a message and they will call you back.
Bismarck, ND
$45
RDO Equipment Co.
2024-01-27 07:38:09
3 Photos
2021 Frontier DT1136
Trencher - Base: 1561XF - Hitch: 3 Point Category I and iMatch - Working Depth at 65 Degree Digging Angle: 36 Inches (914.4 mm) - Chain Width: 6 Inches (152.4 mm) - Working Weight: 650 Pounds (294.8
WATSONVILLE, CA
$6,740
Stan or Cyndy
2024-01-24 00:18:15
3 Photos
3 pt Buzz saw/log splitter combo.
Buzz saw runs off tractor 540 pto Log splitter is powered by tractor hydraulic system. Buzz saw blade 26" diameter. Splitter opening is 28" Splitter blade height
Bismarck, ND
$1,000  OBO
brad
2024-01-23 02:38:52
3 Photos
Assorted 100 count boxes of Stainless Steel Dottie Bolts.
Assorted 100 count boxes of Stainless Steel Dottie Bolts . MBS381 3/8 X 1 Hex head Fully Threaded Stainless Steel Tap . $12.00 per box. (8) MBS381 3/8 X 1 Hex head Fully Threaded Stainless
Beulah, ND
$12  OBO
Floyd Roll
2024-01-22 13:44:47
3 Photos
Dorian D35CXA-881 Universal Lathe Threading & Grooving Holder
Has the Out Side Thread Adapter p/n TIH354-32 , The Holder can accept an inside Thread Adapter as well (Not Included). Does Include a
Minot, ND
$80
vernon
2024-01-20 00:05:22
Wanted old Homelite chainsaw
and or parts for same. If you have please respond back
Fairfield, CA
frm
2024-01-14 19:31:43
Hooks.
Variety sizes of chain or rope hooks. Reasonable offer.
Glasgow, MT
Make an Offer
retired
2024-01-14 00:23:27
cambell housfeld 3 used guns and parts - 1 new reversible tip AL2213 413 - .013" ,
9 new gun tip filters AL1263, used tips 413/515
Dickinson, ND
$30  OBO
GB3
2024-01-10 07:04:52
2 Photos
Tire Stud Gun
Brand new pnumatic tire studding gun. Never used, was going to stud my tires and never did.
Gackle, ND
$175
BradleyH21
2023-12-29 23:33:23
3 Photos
Husky Cabinet
I have three of these husky cabinets to sell. Basically new just somewhat dusty. I used them for storing car detailing products but use something else now is reason for selling. 28W x 33H x 18D. Will
Maddock, ND
$200  Each
James
2023-12-29 22:46:32
Sander and Various Sandpaper.
Power Glide pad sander Sand paper; 3 sheets 3”x9” 60 Grit 2 sheets 3”x9” 100 Grit 4 sheets 3”x9” 240 Grit 6 sheets 9”x11” 60 Grit 18 sheets 9”x11”
Minot, ND
$8  OBO
nddl
2023-12-11 12:36:49
2 Photos
air hoses
red hose is 40.00 with ends the other two hose with end 30.00 each or obo
Bismarck, ND
Multiple Prices
nddl
2023-12-11 11:51:16
3 Photos
cement tool and others
i have a assortment of cement and pkaster tools look at picturer would like to sell as one unit nice clean tools 100.00 or obo
Bismarck, ND
$100  OBO
nddl
2023-12-11 11:50:07
3 Photos
4 wheel set
for tool box or work box or any thing else you want to use them for this is a set of 4 they are made to lock in place
Bismarck, ND
$40
Floyd Roll
2023-12-10 18:19:45
3 Photos
NEW! ROHM Lathe Live Center MK 5 (MT5) 110H
MT: 5 Shank, Size: 110 H Workpiece weight max. kg: 2000 [4409.245 LBS] , Concentricity deviation max. mm: 0.005 [0.000197"], Rotation speed max. rpm:
Minot, ND
$417
Floyd Roll
2023-12-10 18:19:25
2 Photos
NEW! Hougen Rotabroach Morse Taper 5 | MT5 Coolant Thru Arbor #49908
NEW! Hougen Rotabroach Morse Taper 5 | 5MT Coolant Thru Arbor #49908 for use with 1-1/4" Series 53000. Made in USA!
Minot, ND
$100
Floyd Roll
2023-12-10 18:17:54
3 Photos
EXCELLENT! Bison 6-1/4" 6-Jaw SET-TRU Scorll Lathe Chuck w/Bison D1-3 Back Plate
Unique Micro-adjustment Feature Enables Concentricity to-.0005" TIR, w/Fine Adj. Scroll and Jaws are Hardened and
Minot, ND
$1,200
Floyd Roll
2023-12-10 18:17:33
3 Photos
5/8" Kwik-Switch 400 End Mill Holder Universal Engineering p/n 80444
Minot, ND
$35
Floyd Roll
2023-12-10 18:17:17
3 Photos
3/8" Kwik-Switch 400 End Mill Holder Universal Engineering p/n 80442
Minot, ND
$35
Floyd Roll
2023-12-10 18:16:51
3 Photos
1/2" Kwik-Switch 400 End Mill Holder Universal Engineering p/n 80443
Minot, ND
$35
Floyd Roll
2023-12-10 18:15:29
3 Photos
NEW! Dorian Quadra OD/ID Lathe Threading Holder QITP25N-881
Includes a TNMC 32NV CM14 Thread Insert
Minot, ND
$175
Floyd Roll
2023-12-10 18:14:59
3 Photos
Dorian Super Quick Change SD35CXA Lathe Tool Post with 2 Holders
DORIAN #D35CXA-7-71C Extra Heavy Duty CUT-OFF BLADE Lathe Tool Holder & a Generic Turning/Facing Tool Holder. Tool Post is missing
Minot, ND
$150
Bryan
2023-12-10 12:14:15
Wanted: Engine run / test stand
New Salem, ND
Floyd Roll
2023-12-07 15:45:28
3 Photos
Kennametal TG150 Collet Chuck | Potential Machine Tool Spindle
New Old Stock, 2" Shank comes with one (Used) 1.5" Collet P/N SS200TG150117. The Shank has 1.167" inside threads (1.25" O.D.?) I don't
Minot, ND
$65
Floyd Roll
2023-12-07 15:44:41
3 Photos
NMTB-50 Taper DeVlieg Microbore C8 Collet Chuck with 13 Collets
All but 2 Collets are Sandvik Coromant (as noted), Sizes are: 3/8", 1/2" Balas, 9/16", 19/32", 5/8", 11/16", 23/32", 3/4". 13/16",
Minot, ND
$60
Floyd Roll
2023-12-07 15:44:14
3 Photos
ERICKSON SUNDSTRAND TG100 COLLET CHUCK | Potential Machine Tool Spindle
O.D. of the Shank is 2", Includes one 3/4" TG100 Collet. Chuck Range is 3/32" to 1"
Minot, ND
$30
Floyd Roll
2023-12-07 15:43:45
3 Photos
Erickson (Kennametal) TG138 Collet Chuck | Potential Machine Tool Spindle
Includes 7 TG-138 Collets: 1/2", 5/8", 49/64" (Clamping Range to 3/4"), 7/8", 1", 1-1/8" and 1-1/4". The Chuck is New Old
Minot, ND
$70
Floyd Roll
2023-12-07 15:42:21
3 Photos
NEW! DORIAN SDN35CXA Lathe Quick Change Tool Post, CXA, 14-17 In Swing
Fully interchangeable with Aloris and other standard tool posts. Holding force produces over 20,000 lbs. per sq. inch. The Good
Minot, ND
$480
Floyd Roll
2023-12-07 15:41:35
3 Photos
Kwik-Switch 400 Series TG150 Collet Chuck with a 1-1/2" Collet
Minot, ND
$60
Floyd Roll
2023-12-07 15:41:13
3 Photos
Milling Vise Base | Universal-Base
Clamping Circle 6-3/4' Top. Designed for 5/8" Bolts. Top pin O.D. 7/8", Height Set Flat 7-1/4". Bottom Base 12-15/16" Long by 9-5/8" Wide. All 3 pivots marked 0-90
Minot, ND
$200
461 Ads | Page 15 of 16 | Jump to Page: